KATHREIN Multiswitches - Sat IF Distribution Systems

• For distribution of four satellite frequency planes and terrestrial signals to 6, 8, 12 or 16 connections
• Only one drop cable is required per receiver (for twin receivers two drop cables are required)
• Independent choice of polarity/band (horiz./vert., low/ high) by each receiver
• Switching over the coaxial cable using 14/18 V and 0/22 kHz signal frequencies
• With built-in amplifi er for low connection loss in the satellite and terrestrial range
• Terrestrial signals can be received even when the satellite receiver is switched off
• High degree of decoupling between outputs
• LNB remote feeding can take place via the horizontal low input. All other inputs are voltage-free (enabling operation with UAS 585)
• Built-in pre-emphasis to equalise the cable attenuation
• Low power consumption due to high-effi ciency, short-circuit proof switched-mode power supply unit and power- saving concept (each multi-switch branch is powered by the receiver connected to it and is thus switched off whenever the receiver is switched off )
• For indoor installation

• EXR 156 Multiswitch: 6 Subscriber connections
  
• EXR 158 Multiswitch: 8 Subscriber connections
  
• EXR 1512 Multiswitch: 12 Subscriber connections
  
• EXR 1516 Multiswitch: 16 Subscriber connections
  

• Cascadable multi-switches for distribution of eight satellite frequency planes and terrestrial signals to many receivers
• Only one drop cable is required per receiver (for twin receivers two drop cables are required)
• Facility to select horizontal/vertical, low/high, Sat position A / position B independently for each receiver using DiSEqC™ controls
• If the receiver is not DiSEqC™ controlled, switching between horizontal/vertical, low/high is on Sat position A; with Tone Burst Sat position A/position B is additionally possible
• Built-in amplifi er for low attenuation in sat band
• Built-in pre-emphasis to equalise the cable attenuation
• Terrestrial signals can be received even when the satellite receiver is switched off
• LNB remote feeding can take place via the horizontal lowinputs. All other inputs are voltage-free (enabling operation with UAS 585)
• For indoor installation
• Terrestrial range: 5-862 MHz, passive
• High degree of decoupling between outputs

• Multiswitch EXR 2908: Multi-switch for eight connections, with built-in power supply unit. Low power consumption due to high-effi ciency, short-circuit proof switched-mode power supply unit and power-saving concept (each multi-switch branch is powered by the receiver connected to it and is thus switched off whenever the receiver is switched off ) Cascadable with EXR 2998
• Multiswitch EXR 2998: Multi-switch loop-through for system extension with eight connections each. Highly cascadable (up to 40 connections)

• Cascadable multi-switch for splitting 16 satellite frequency planes and terrestrial signals to multiple receivers
• Only one drop cable is required per receiver (for twin receivers two drop cables are required)
• Independent choice of polarity horizontal/vertical, low/ high, the Sat positions A/B/C/D by each receiver due to DiSEqCTM control
• If the receiver is not DiSEqCTM controlled, switching between horizontal/vertical, low/high is on Sat position A; with Tone Burst Sat position A/position B is additionally possible
• Built-in amplifier for low attenuation in sat band
• Built-in pre-emphasis to equalise cable attenuation
• Terrestrial signals are also receivable with the satellite receiver switched off
• Remote feed possibility via the inputs horizontal low. All other inputs are voltage-free (thus operation with UAS 585 possible)
• For indoor installation
• Terrestrial range: 5-862 MHz, passive
• High degree of decoupling between outputs

• Multiswitch EXR 1708: Multi-switch for eight connections, with built-in power supply unit. Low power consumption due to high-effi ciency, short-circuit proof switched-mode power supply unit and power- saving concept (each multi-switch line is powered by the receiver connected to it and is thus switched off whenever the receiver is switched off ) Extendable with EXR 1718
• Multiswitch EXR 1718: Multi-switch loop-through for system extension with eight connections each. Highly cascadable (up to 40 connections)

Our Company, all these years of operation, has focused its attention on the customer, the quality of its materials and its credibility.
We focus on each customer separately and our philosophy is to always offer the ideal answer and solution to each of its requirements.

Our credibility is proven by more than 60 years of operation in Greece and by the largest CATV network projects that have been built by our Company #LYRA SA

All of our materials have the necessary certificates of suitability and are manufactured in accordance with the strictest European specifications.